Concrete Overlays in Lacey, WA

A Lacey coat is only as good as the base under it. We check the base first, coat the sections that pass, and hold any section against a public edge until the city answers in writing.

Concrete overlay layersA thin overlay with a bond coat and sealer sits on a sound existing slab, with a repaired crack. 12345
Overlay layers: new surface, sound slab
  1. Sealer for wet-weather protection
  2. Overlay layer with the chosen texture or pattern
  3. Bond coat on a cleaned, prepared surface
  4. Existing slab, checked for movement before we start
  5. Repaired crack that has stopped moving

Concrete overlays in Lacey: what to know

A 2024 consultant memo ties the 2022 stormwater manual’s Core Requirement No. 2 to new plus replaced hard surface under 2,000 square feet, but the text we read does not say how a thin resurfacing coat is counted. We ask the city in writing whether a coat falls under that line before pricing.

A coat that runs onto a shoulder or sidewalk strip may fall under Lacey’s right-of-way application, which lists sidewalk, curb, and gutter work and driveway approaches. We ask Public Works before coating those edges. The same application lists lane and sidewalk closures with police and fire notice, so any closure date is set with the crew before the coat starts.

Permits and rules in Lacey

Before we quote a Lacey coat, we look over the slab, log moisture readings section by section, and confirm the public edges with Public Works. Questions about a sidewalk strip go to Public Works in writing, and the written answer is logged on the job file before any mixing begins.

Rules change and vary by parcel, so we confirm the current requirements with the city before we start.

How we approach it

  • Walk each slab on a dry day and map its soft ground
  • Dig out failed concrete and recompact the bed under it
  • Coat only the sections that cleared their moisture reading
  • Hold sidewalk-strip sections until Public Works replies

For the full process, see our Concrete Overlays page.

Building in the cold months? See our guide to winter concrete pours.

Our concrete overlays work, serving Lacey

Examples of our work. We build concrete overlays in Lacey and the cities around it. See all of our work

Questions from Lacey homeowners

Would a Lacey slab with surface wear still take a coat?

That depends on what the base reads like after repairs. A firm base takes a coat, while a section that keeps returning moisture is set aside, because a coat laid over it would seal the wetness in.

How does Lacey count a thin coat toward its new surface total?

Nothing we read addresses a coat directly. The 2024 memo quotes the manual’s 2,000-square-foot line for new plus replaced hard surface, so we put the coat question to the city in writing before anything is ordered.

Can the concrete at a Lacey curb line get a coat?

Only after Public Works replies. Sidewalk, curb, and gutter work sits on the right-of-way application’s list, so the strip stays uncoated until the reply is on file.

Other work in Lacey

The same service nearby

Talk to us about your project

Call or email us. We’ll talk through the work and set up a time to see the site.

Call 206-483-5334Get a quote