Concrete Overlays in Bremerton, WA

Concrete overlays in Bremerton: what to know

Each slab is probed in several spots, and soft areas, hollow sounds, and cracked edges are marked on a sketch. Failed concrete is removed, and the base is rebuilt before a coating is considered. The sketch marks which areas are sound enough to coat, and nothing outside those marks is coated.

Work inside the public right-of-way needs a right-of-way use permit under BMC 11.02.060(A), approved by the Director of Public Works and Utilities or a designee. We keep any right-of-way section on its own track with its own written reply, while the private slab continues on its own timeline. A coating stops at the boundary of the permitted area until that reply is on file.

Permits and rules in Bremerton

We check the slab size and any retaining element on the scope before the overlay question goes to city staff. Right-of-way sections are separated first, since they need a permit under BMC 11.02 before work starts. Dates stay open until each written reply is filed, and the estimate lists any reply still pending.

Rules change and vary by parcel, so we confirm the current requirements with the city before we start.

How we approach it

Probe the slab and mark soft or hollow areas on a sketch
Rebuild failed base before any coating is chosen
Coat only the areas the sketch marks as sound
Hold right-of-way sections for their own permit

For the full process, see our Concrete Overlays page.

Building in the cold months? See our guide to winter concrete pours.

Our concrete overlays work, serving Bremerton

Examples of our work. We build concrete overlays in Bremerton and the cities around it. See all of our work

Questions from Bremerton homeowners

Can an older Bremerton slab take an overlay?

Sometimes, once the base is firm and any movement has been corrected. A coating over a slab that keeps moving tends to crack along the same lines, so the probe sketch decides whether the base is ready. The sketch stays in the job file.

Who answers the permit question for a Bremerton overlay?

The building handout does not address resurfacing, so we ask city staff for a written answer once the slab size and any retaining element are on the scope. Dates are held until that answer is on file.

Can a Bremerton coating reach past the property line?

Not until a right-of-way use permit covers that work under BMC 11.02.060(A). Lifted panels are reset first, since a coating over a moving panel will not hold, and each reset panel is logged on the sketch.