Concrete Overlays in North Bend, WA

An overlay renews a concrete surface that is sound underneath. We check the slab first, mark any section that is still moving, and recommend a coat only where the base is stable. Thresholds and walk joints stay level with the new surface when the buildup is kept thin.

Concrete overlay layersA thin overlay with a bond coat and sealer sits on a sound existing slab, with a repaired crack. 12345
Overlay layers: new surface, sound slab
  1. Sealer for wet-weather protection
  2. Overlay layer with the chosen texture or pattern
  3. Bond coat on a cleaned, prepared surface
  4. Existing slab, checked for movement before we start
  5. Repaired crack that has stopped moving

Concrete overlays in North Bend: what to know

An overlay on your lot is a surface job, and the city’s permit FAQ does not list overlays or resurfacing. The approach at the street is different. Chapter 12.24 treats curb cuts and driveways as Type B permit activities, so a resurfaced approach that touches the street connection is a right-of-way question we confirm with the city before we start.

Settlement is the risk that a coat cannot fix. A slab that has sunk over loose fill or an old trench carries its low corner through a new surface, and cracks that are still moving will show through again. We sound the slab, repair the low corners, and check drainage at the edges before any buildup goes on.

Permits and rules in North Bend

We confirm with the city whether an overlay on your lot needs a permit, since the city’s permit FAQ does not address resurfacing. We also ask how the city treats a resurfaced apron or walk under Chapter 12.24. Both answers come before quoting, so the schedule reflects the right track for your lot.

Rules change and vary by parcel, so we confirm the current requirements with the city before we start.

How we approach it

  • Sound the slab and mark any section that moves underfoot
  • Repair settled corners and cracks before the overlay goes on
  • Keep the buildup thin so door thresholds and walk joints stay right
  • Ask the city about the apron and walk before coating them

For the full process, see our Concrete Overlays page.

Building in the cold months? See our guide to winter concrete pours.

Our concrete overlays work, serving North Bend

Examples of our work. We build concrete overlays in North Bend and the cities around it. See all of our work

Questions from North Bend homeowners

Can an older North Bend driveway be overlaid instead of replaced?

Often, when the slab is sound underneath and cracks have quit moving. We check for sunken sections and loose fill first, and we repair those before any coat goes on, because a new surface cannot correct a slab that has moved.

Is a city permit needed before my North Bend driveway gets a new surface?

The city’s permit FAQ does not address overlays, so we confirm the answer for your address. The approach where the driveway meets the street is a right-of-way question under Chapter 12.24, and we confirm that part with the city as well.

Can you coat the sidewalk in front of my North Bend home?

Only after we confirm the city’s position for that walk. Chapter 12.24 governs the right-of-way, and a coating will not repair a lifted or broken panel, so we inspect the panel first.

Other work in North Bend

The same service nearby

Talk to us about your project

Call or email us. We’ll talk through the work and set up a time to see the site.

Call 206-483-5334Get a quote