Concrete Overlays in Arlington, WA

Concrete overlays in Arlington: what to know

Testing the base comes first. Cores are taken at several points, each result is recorded, and any section that gives way under the probe is cut away. Joint movement is fixed before a coating enters the plan, because a surface layer will not repair a base that is giving way.

Walk work along the frontage follows its own track. Chapter 20.56 does not state who maintains or replaces that walk, so city staff are asked before any coating reaches the public edge. Coating stops at a marked boundary until a reply is filed, and the private slab keeps moving meanwhile.

Permits and rules in Arlington

We confirm the slab’s measurements and any retaining element before quoting. We then ask city staff whether a fresh coat on an existing slab counts as replaced hard surface, because the stormwater answer turns on it. Frontage work follows the city’s reply on the right-of-way permit, and the overlay line reads pending until both answers are filed.

Rules change and vary by parcel, so we confirm the current requirements with the city before we start.

How we approach it

Take cores at several points and record each result
Remove sections that give way when probed
Apply a layer only where the base sounds firm
Hold the public edge until the city replies

For the full process, see our Concrete Overlays page.

Building in the cold months? See our guide to winter concrete pours.

Our concrete overlays work, serving Arlington

Examples of our work. We build concrete overlays in Arlington and the cities around it. See all of our work

Questions from Arlington homeowners

Can a worn Arlington drive get a resurfacing layer?

Frequently yes, once the base is shown to be firm and any joint movement has been dealt with. Movement comes first in our sequence, since a coat laid over shifting ground rarely lasts. The probe log is filed with the job before a product is picked.

Does an Arlington overlay need a permit?

The exemption list does not address overlays, so we measure the slab footprint and any retaining element, then put the question to the city for your parcel. The reply is recorded before crews are booked.

Can you coat the sidewalk in front of an Arlington home?

Not before the city answers for that stretch. Lifted panels are reset and repaired first, because a coating will not hold a moving panel. Each repaired panel is recorded on the sheet with a photograph.