Concrete Overlays in Parkland, WA

Concrete overlays in Parkland: what to know

We did not find a square-foot figure that covers a resurfacing coat in the county sources we read. The 2026 errata’s cubic-yard figures concern materials moved, so they do not settle how a coat is counted either. We put that question to Planning and Public Works in writing before pricing the coat, and the reply goes into the job file.

Any coated section that reaches the county right-of-way follows the county’s approval rule. Aprons get separate treatment, because the county requires a driveway approach to meet current standards. Our crew leaves the apron uncoated until that standard is settled and the county’s answer is on file.

Permits and rules in Parkland

Before we coat, we verify the slab’s condition and check whether a critical area touches the parcel, since the county says a driveway in one may need a permit. We confirm the right-of-way line on the site plan, and we ask Planning and Public Works in writing about any coat that reaches the road edge.

Rules change and vary by parcel, so we confirm the current requirements with the city before we start.

How we approach it

Walk the slab on a dry day and mark sunken corners
Cut out failed concrete and compact the base beneath it
Hold any section that reaches the right-of-way for approval
Ask the county how a coat is counted, in writing

For the full process, see our Concrete Overlays page.

Building in the cold months? See our guide to winter concrete pours.

Our concrete overlays work, serving Parkland

Examples of our work. We build concrete overlays in Parkland and the cities around it. See all of our work

Questions from Parkland homeowners

Is a worn Parkland slab a candidate for a thin surface layer rather than replacement?

Sometimes. A sound, level slab can take a coat once cracks and sunken corners are repaired. A coat over a deteriorating base does not hold, so we find the cause of any wet spot before the coat goes on.

Does a Parkland overlay need county stormwater review?

We have not found a county square-foot figure for a resurfacing coat, and the errata’s cubic-yard figures measure materials moved. We ask the county how a coat is counted before we order anything, and each new pour is added to the job running total.

Can the Parkland apron at the county road be coated too?

That is the county’s call. Work in the right-of-way needs Planning and Public Works approval, and the county wants the approach at current standards, so the apron stays uncoated until its written reply arrives.